Laboratory Spray Dryer SS-07

The New SS-07 spray dryer gives you 25% more throughput.

The SS-07 has the smallest foot print of any comparable spray dryer on the market and is the easiest of any spray dryer to setup and use by a single operator. The accessories available and the customisability of our units offer the user a multitude of spray drying options and ways to control the operation, giving the best product yield in the industry.

  • Efficient, touch screen controlled spray drying of temperature sensitive products
  • Aqueous only (A Version), Aqueous and solvent (AG Version) based solutions.
  • All in one solution, quick assembly and ease of use by a single operator
  • Designed specifically for research and pre-production trials
  • Easily adaptable for dual cyclone high yield use
  • Wide range of customizable spares and accessories.
Spray dryer fittings

A robust chemically resistant 316 grade stainless steel cabinet houses all mechanical and electrical components. All clamps and fittings are designed to allow efficient assembly and removal of the glassware. The rear of the cabinet includes an inlet filter designed to remove 99.99% of air laden particles ensuring that the drying air does not include contaminants. A specially designed stainless steel support stand is available where bench space or height restrictions are a consideration..

Two Channel Nozzle
The 316 stainless steel atomiser consists of an inner tube for the liquid sample leading to a small diameter jet. An outer tube directs the supply of compressed air to the nozzle and the close tolerance gap between the nozzle and the jet ensures a fine vaporized spray. The SS-07 is supplied as standard with 0.5 mm jet, other sizes are available as accessories. The atomiser incorporates an automatic de-blocking device that prevents the jet nozzle from becoming blocked, this is activated by an integral compressor. De-blocking is sometimes necessary with materials which may solidify or when large particles in suspension cause blockages in the jet.

Spray dryer Control Panels

Controls & Functionality
The SS-07 is designed to ensure that all functions are simple to select and adjust to quickly achieve the optimum conditions for spray drying. Using a clear touch screen and LCD display which is protected to IP65, the operator can control the following functions:

  • Inlet temperature
  • Airflow Volume
  • Pump speed
  • De-blocker frequency
  • Temperature Graph


Click here to view or download the PDF Document for the SS 07 Basic Spray Dryer

SS-07 Spray Dryer


Spray Dryer SD 06 Close Up




Application: Aqueous & Solvent (AG) or Aqueous only (A)
Atomiser type: 0.5mm, 2 Channel,
316 stainless steel
Evaporation rate: 1500 ~ 2000 ml/h
Temp. range: 50℃ ~ 250℃ ±1%
Air Throughput:   15 ~ 50m³/hr
Settings: Touch Screen controlled  
Compressor: 2m³/hr @ 2 bar - 1.7m³ @ 4 bar
Heater: 4kW
Feed pump: Variable speed peristaltic pump   
Borosilicate glass  
Blower: Variable; Touch Screen controlled
De-blocking: Automatic; 3 speed settings
Noise (dB): 0.5mtr = 68.6 dB 1.0mtr = 66.8 dB
1210 x 825 x 600mm
Weight 85Kg
AC 220/240V
50/60Hz 21A
Get a quote for the SS-07 spray dryer
view the recommended spares kit for the SS-07